7 • If necessary, adjust the plate to allow the locking pin to slide, otherwise go to point 15.
8 • Turn the central top until the plate is accessible.
9 • Slightly loosen the screws of the plate.
10 • Extend the table completely.
11 • Correct the position of the plate.
12 • Turn the central top until the plate is accessible.
13 • Fix the screws previously loosened.
14 • Extend the top completely.
15 • Lift the locking pin, turning it to lock it in place.
16 • If the table does not open completely or the extensions are too far away from the top: adjust the extensions.
17 • Loosen the cylinders inside the frame.
18 • Holding the frame firmly, move the extensions outwards.
19 • Extend the top completely, locking it in position with the locking pin.
20 • Holding the frame firmly, return the extensions to their position.
21 • Fix the cylinders inside the frame.
22 • Close the top, locking it with the pin.
23 • Place the top over the base.
24 • Fix the base to the top.
25 • To adjust the height of the extensions: loosen the cylinders inside the frame, adjust the height using the adjusters and fix the cylinders back in its place.
If you need it, you can also download the “Instruction Sheet” in PDF format from the button below.
5 • Lift the locking pin, turning it to lock it in place.
6 • If the table does not open completely or the extensions are too far from the top: adjust the extensions.
7 • Loosen the cylinders inside the frame.
8 • Holding the frame firmly, move the extensions outwards.
9 • Extend the top completely, locking it in position with the locking pin.
10 • Holding the frame firmly, bring the extensions into the correct position.
11 • Fix the cylinders inside the frame.
12 • Close the top, locking it with the pin.
13 • Place the top over the base.
14 • Fix the base to the top.
15 • To adjust the height of the extensions: loosen the cylinders inside the frame, adjust the height using the adjusters and fix the cylinders back in place.
If you need it, you can also download the “Instruction Sheet” in PDF format from the button below.